art by keith
Rocket Height Chart
Rocket Height Chart
Couldn't load pickup availability
This Rocket Height Chart is perfect for any child/family with an interest in space, flying, or rockets specifically of course. The great thing about this height/growth chart is that they are mounted a few feet off the ground, and can be moved very easily (they are quite light) if you wanted it in a different space within your home, or if you ever move homes. It comes raw and is ready for paint. You get to choose how this Rocket looks!
Has a clear primer finish.
Material: Made from half inch mdf
Dimensions: 48" x 13"
Share
Installation Guide
1. Applying to an inside corner:
Here’s a trick to use when applying our edges to a countertop with an inside corner. Instead of filing out the inside radius left by the router, use a file to round off the backside of the edge. With a little practice, this process will become just as easy and you will notice better results than with the traditional method.
2. Around the dishwasher:
To help prevent damage to your edge when installing around the dishwasher, simply apply a bead of silicone sealant to the edge of the dishwasher mounting board, then press the board into the backside of the edge. Next, strike the excess silicone with your finger to create a waterproof seal.
3. Cold bending:
GEM-LOC can be cold bent, but only in the Flatback (FB) style and when using an acrylic solid surface, such as Corian®. The counter must also be an absolute radius, free of any bumps or flat spots. The Flatback (FB) profile can be successfully bent to an 18″ radius.
4. Easy way to set edge height:
An easy way to find the approximate height to overlap GEM-LOC edges is to use a piece of masking tape. Put a piece of tape on the countertop deck right in front of the edge. The solid surface element should protrude approx .005-.007 of an inch, or 1 layer of tape, above the decking.
5. Getting a gloss finish on the solid surface element:
The GEM-LOC corner element comes in a standard matte finish. If a higher sheen is desired, 00 or 000 steel wool quickly brings out a high gloss. This technique can also easily remove small scratches in the solid surfacing.
6. Keep from scratching the laminate when filing:
One way to keep your laminate scratch-free during the filing process is to use a few wraps of masking tape on the end of the file that will be moving against the countertop. This will make it safe and easy to file your GEM-LOC edge flush with the countertop decking.
7. Wall impedes routing:
When routing for a TG profile, a wall or obstacle can stop your router short, leaving an unrouted section in the deck. To get around this, simply shave off the excess tongue with a razor knife.
8. Glue:
When gluing, run a thin bead 1/4” from the top of the edging and a thin bead 1/4” from the bottom, apply to countertop, tape tightly bottom to top, and remove squeeze out with a damp rag. You want a little squeeze out but using too much glue can cause thick seams, gaps, and even wood swelling.